Fast, Reliable Blown-In Insulation Across Redwood
Blown-in insulation in Redwood, TX typically runs $1.80-$3.20 per square foot of attic floor, with most whole-attic jobs landing between $2,400 and $5,800 depending on existing conditions and target R-value. Our crews dispatch from the Dallas-Fort Worth office and serve Redwood directly, usually scheduling within 48-72 hours and arriving with the blower truck, material, and air-sealing kit in one trip. That’s how we work in unincorporated Gonzales County - rural properties mean longer drives, so we don’t make two of them.
Call (737) 337-8049 for a written price before any work starts. Estimates are free, and we bring a copy of our scope and warranty with us.
Why Topside Attic Insulation San Marcos Is Redwood’s Preferred Blown-In Insulation Company
We’ve insulated homes along FM 532, FM 20, and the county roads between Redwood and Harwood - enough to know that a “standard” attic job here is anything but. The housing stock is older. The wall cavities are sometimes empty. The crawl spaces under pier-and-beam farmhouses pull ground moisture straight into the living space. Our Blown-In Insulation team treats air sealing as a hard prerequisite, not an upsell, because we’ve seen what happens when you blow new material over unsealed top plates in a house that was never designed to hold conditioned air.
Since 2016, we’ve sealed and insulated 9,000+ homes. Every job starts with a written price and ends with a Documented Photo Record. On applicable jobs, we publish before-and-after blower-door numbers - a pressurization reading that shows, in one figure, how much conditioned air the home was losing before and after our work. Under Haven Standard Clause 1: flat price, written scope, written warranty before anyone lifts a tool.
Our 365-Day Done Right Promise applies to every completed job. If it’s not done right, we make it right. Calls are answered by a live person 24/7 - no voicemail loops, no callback windows measured in business days.
We also offer a Free Second Opinion on any written estimate. Bring us a competing quote and we’ll read it with you.
Our Blown-In Insulation Services in Redwood
Blown-In Cellulose
Cellulose is treated ground paper, dense-packed to resist settling and airflow. In Redwood’s humid subtropical climate, it’s particularly effective in wall cavities where old fiberglass batts have degraded to the point of uselessness. We source from GreenFiber and other manufacturers - no proprietary lock-in. Most attic cellulose jobs in Redwood run $2.20-$3.80 per square foot installed, with wall dense-pack work adding $1,800-$3,400 depending on cavity depth and accessibility. The material handles both ends of our weather: blocking radiant heat gain in July and slowing cold infiltration during rare severe freeze events like Winter Storm Uri.
Blown-In Fiberglass
Fiberglass blown-in - often Owens Corning or Johns Manville - works well for attic top-ups over existing material, provided the old batts aren’t moisture-compromised. We don’t blow over degraded fiberglass. In Redwood, where summer attic temperatures exceed 150°F, compressed or humidity-damaged old batts get removed first. Then we seal, then we insulate. Typical blown-in fiberglass attic jobs here run $1.80-$3.20 per square foot. The finished R-value depends on depth, and we measure that depth with a ruler, not a guess, before we leave.
Dense-Pack Wall Insulation
This is the service we emphasize most in Redwood. Dense-pack cellulose is blown into closed wall cavities at 3.5-4.0 pounds per cubic foot, creating an air-impermeable barrier that conventional batts cannot match. Here’s the local reality: many Gonzales County farmhouses and ranch homes were built with zero wall insulation - not thin, not degraded, but absent. We drove out to a pier-and-beam farmhouse outside Redwood on FM 532 and found two exterior wall cavities completely bare - no original insulation, just the back of the siding. After dense-packing those walls with GreenFiber cellulose and topping the attic with blown-in fiberglass over the old compressed batts, the homeowners said the front rooms finally held temperature through the afternoon. We also sealed the belly boards from the crawl space, which was the biggest source of ground moisture wicking into the living space. Dense-pack wall work in Redwood typically runs $2,800-$5,200 for a full house, or $1,800-$3,400 for partial cavity work.
Blown-In Top-Up
Some Redwood attics have adequate insulation depth from a previous install but have settled below current code or the homeowner’s comfort standard. We assess what’s there first. If the existing material is dry and structurally intact, we calculate the gap and blow to fill it. If it’s compromised, we remove it. No exceptions. Top-up jobs in Redwood generally run $1,400-$3,200. We document the before depth, the after depth, and any air sealing performed in between.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Redwood
We stock and install materials from Johns Manville, Knauf, Rockwool, and CertainTeed, among others - sourced to spec, not pushed from inventory. For Redwood customers, this means we match the material to the application rather than selling what’s on the truck. Johns Manville blown-in fiberglass for high-temperature attics. Knauf EcoFill for cellulose-compatible top-ups. Rockwool where fire resistance and moisture management matter. We carry no proprietary products, so you’re never locked into a single manufacturer’s system or warranty chain.
Common Blown-In Insulation Problems We See in Redwood Homes
- Attic blown-in fiberglass settles and compresses unevenly over time, dropping R-value right where the roof deck radiates 150°F+ summer heat into the unconditioned space. We measure existing depth with a ruler and calculate the actual performance gap, not the theoretical one.
- High South-Central Texas humidity degrades old fiberglass batts, and when those degraded batts sit under a new blown-in top-up without air sealing, moisture keeps migrating through and the added insulation underperforms. We remove compromised material before we add anything.
- Older Gonzales County pier-and-beam homes with bare exterior wall cavities let blown-in material escape through unsealed top plates and balloon-frame chases before it ever reaches working density. Our dense-pack protocol includes cavity isolation and port placement that prevents this.
- Rural acreage shops and detached workshops with oversized or heavy doors create large thermal breaks that blown-in attic insulation alone cannot address, so the whole envelope feels under-insulated even after a good blow. We evaluate the building as a system, not a single surface.
Pricing for Blown-In Insulation in Redwood, TX
| Service | Typical Range in Redwood | Notes |
|---|---|---|
| Blown-in cellulose attic (new install) | $2,400-$5,800 | Includes air sealing; R-38 to R-49 target |
| Blown-in fiberglass attic (new install) | $2,200-$5,200 | Remove degraded batts if present |
| Blown-in top-up (attic) | $1,400-$3,200 | Assumes dry, intact existing material |
| Dense-pack wall insulation (full house) | $2,800-$5,200 | Zero-cavity homes at higher end |
| Dense-pack wall insulation (partial) | $1,800-$3,400 | Selected walls or floor plan zones |
| Insulation removal + replacement | $3,200-$6,800 | Includes disposal, sealing, new material |
What moves the number: attic square footage, existing material condition, accessibility (steep roof pitches and limited hatch openings add labor), whether wall cavities are empty or partially filled, and whether the home needs complementary air sealing or crawl space work. Every estimate we provide in Redwood is written, itemized, and delivered before any work starts - Haven Standard Clause 1. No verbal quotes, no “we’ll figure it out when we get there.”
Call (737) 337-8049 for your written estimate. They’re free, and we deliver them in person or by text, whichever you prefer.
We Also Serve Cities Near Redwood
Our crews cover Redwood and the surrounding Gonzales County area, with regular runs to San Marcos, Kyle, Lockhart, and Buda for building envelope work. Dispatch is coordinated from our Dallas-Fort Worth office, but the truck that shows up at your property carries local knowledge of South-Central Texas humidity, freeze-event vulnerability, and the specific failure modes of rural homes in this corridor.
Serving Redwood, TX - Our Local Coverage Area
We’re based in the Redwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Blown-In Insulation in Redwood
Many Redwood-area homes were built with no wall insulation at all, not just inadequate material - empty cavities that let outdoor air move freely between siding and drywall. Dense-pack cellulose fills these cavities at 3.5-4.0 pounds per cubic foot, creating an air barrier that batts cannot achieve. Without it, even a well-insulated attic leaks conditioned air through the walls. Call (737) 337-8049 and we’ll assess your cavities with a borescope - estimates are free.
Blown-in insulation addresses conductive heat gain; radiant barrier addresses radiant heat gain. In Redwood’s unconditioned attics that exceed 150°F, you need both for optimal performance. We typically recommend R-38 to R-49 of blown-in material plus targeted air sealing first, then evaluate whether radiant barrier is cost-effective for your specific roof geometry. The blower-door test tells us where the air is moving, which determines the priority. Call (737) 337-8049 for a written assessment.
Expect longer install time, more material, and significantly greater comfort improvement. Zero-cavity homes in Gonzales County often show the most dramatic before-and-after blower-door improvements - we’ve seen 40-60% reduction in air leakage on dense-pack jobs where walls were previously bare. The work requires interior access through small holes drilled in drywall or exterior siding, which we patch and match. Written scope, written price, written warranty - before anyone starts. Call (737) 337-8049 to schedule.
Blown-in attic insulation helps, but oversized or heavy doors on rural workshops create thermal breaks that ceiling insulation alone cannot fix. We evaluate the whole envelope: door seals, wall cavities, and whether the structure is conditioned or unconditioned. For conditioned workshops, we may recommend dense-pack walls plus attic blow; for unconditioned storage buildings, the calculation differs. We don’t sell attic insulation to solve a door problem. Call (737) 337-8049 for a building-specific written scope.
Some difference, not enough. Open crawl spaces in Redwood’s humid climate pull ground moisture and outdoor air directly into the floor assembly, undermining attic insulation gains. We typically recommend crawl space encapsulation or at minimum belly board sealing alongside any blown-in attic work. The documented approach: blower-door test before, air seal the envelope, insulate, then test after. The numbers show whether the crawl space is still the dominant leak. Call (737) 337-8049 - we include crawl space assessment in every Redwood estimate.
Written by Wes Okafor, Owner at Topside Attic Insulation San Marcos, serving Redwood and Gonzales County with building envelope work since 2016.