Attic Insulation in Manor - Same-Day Service, Done Right the First Time

Fast, Reliable Attic Insulation Across Manor

Most attic insulation jobs in Manor run $1,800-$4,500 depending on whether we’re topping up existing material or stripping and replacing a failed builder-grade installation. We dispatch crews to Manor daily from our Austin office, and we can usually get a technician out for a written estimate within 24-48 hours. Call (737) 337-8049 to schedule - estimates are free, and every job starts with a flat written price before anyone touches your attic.

Call (737) 337-8049

We’ve worked in enough homes off Pickle Parkway and out toward Lockwood Acres to know what we’ll find before we pull the hatch. Manor’s housing stock is almost entirely post-2000 construction, and the builders cut the same corners over and over. That repetition works in your favor - we can scope and quote faster here than almost anywhere else in the metro.

Why Topside Attic Insulation San Marcos Is Manor’s Preferred Attic Insulation Company

Our Attic Insulation team has sealed and insulated thousands of homes since 2016, and a growing share of that work is in Manor’s newer subdivisions. Homeowners in Kingsbery Park and the Presidential Glen area leave reviews that mention the same things: we showed up on time, we named the price before we started, and we left blower-door numbers that proved the work.

We answer calls 24/7 with a live person - no voicemail loops, no “we’ll call you back Tuesday.” For Manor, that means same-day or next-day scheduling on most non-emergency jobs, and we text you when your technician is en route with a name and photo. Dispatch runs from our Austin office, but our crews live and work throughout the eastern metro, so you’re not waiting for someone to drive in from Round Rock or San Marcos.

The documentation matters to Manor homeowners, and we get that. Every job closes with a Documented Photo Record, and on air-sealing jobs we publish before-and-after blower-door readings - a pressurization measurement that shows, in one number, how much conditioned air your home was losing before and after the work. Under Haven Standard Clause 1, you get a written scope, a flat price, and a written warranty before anyone lifts a tool.

Our Attic Insulation Services in Manor

Blown-In Attic Insulation

Blown-in fiberglass or cellulose is what we install most often in Manor, and for good reason. The post-2000 tract homes off Manor Expressway and East Parmer Lane were originally insulated with blown fiberglass to R-19 or R-22, and that material settles and compresses within a decade - sometimes dropping to effective R-11 or lower. We air-seal first, then blow new material to modern depth, typically R-38 to R-49 for this climate zone. Most blown-in jobs in Manor run $2,200-$3,800 for a typical 1,800-2,400 square foot home.

Attic Batt Insulation

Batt insulation - pre-cut fiberglass or mineral wool panels - makes sense in Manor when we’re working in attics with limited access, doing partial repairs, or insulating knee walls and odd framing bays. We use Knauf and Johns Manville batts cut to fit, not stuffed and compressed. In the identical DR Horton-era floor plans around Presidential Meadows, we often find thin or missing batts at the eave edges where the original crew rushed the job. Replacing those with properly fitted R-30 or R-38 batts, combined with baffles for ventilation, closes thermal bypasses that undermine the whole attic assembly.

Attic Insulation Top-Up

A top-up is the most common call we get in Manor, and it’s usually the right first move. If your original blown fiberglass has settled but hasn’t been disturbed by rodents or water damage, we can air-seal the ceiling plane and blow new material on top to reach code-current depth. This saves the cost and mess of full removal. Top-up jobs in Manor typically run $1,800-$2,800. We always pull a test patch first to verify the existing material is clean and dry - no point in burying a problem.

Attic Insulation Replacement

Full replacement becomes necessary when the original material is contaminated, water-damaged, or so poorly installed that topping up won’t fix the thermal bypasses. In Manor’s slab-on-grade homes near Lockwood Farms, we’ve found attics where the builder-grade insulation was installed before the drywall was fully cured, trapping moisture and compressing the fiberglass against the ceiling. Replacement means removal, disposal, air sealing, and fresh install - typically $3,200-$4,500 for a standard Manor home. You walk away with a clean attic, a sealed envelope, and photo documentation of every step.

Attic Baffles & Ventilation Prep

Every insulation job in Manor needs proper ventilation prep, or we’re just trapping heat and moisture. We install baffles - cardboard or foam channels - at every eave vent to keep the insulation from blocking airflow and to prevent wind-washing that strips heat from the material. In Manor’s 150°F summer attics, inadequate ventilation destroys insulation performance in a matter of seasons. Baffles and ventilation prep are included on every full job and run $400-$700 as a standalone service.

Before

After

Trusted Brands We Service in Manor

We stock Owens Corning, Knauf, and Rockwool insulation products for Manor jobs, sourced through standard distribution - no proprietary lock-in, no mystery materials. If you have a preference based on prior research or a contractor recommendation, we’ll work with it. Our crews carry Johns Manville batts and Owens Corning blown fiberglass on every Manor truck, so we’re not waiting on a delivery to finish your job. Every bag is labeled with its R-value and manufacturing date, and we leave the empty bags with you if you want to verify what went in your attic.

Common Attic Insulation Problems We See in Manor Homes

• Settled blown fiberglass dropping below labeled R-value. The builder-grade R-19 or R-22 installed in Presidential Glen and Bella Vista at Cottonwood Creek homes has compressed to R-11 or lower within 8-12 years. You paid for a thermal barrier; you got a thin blanket that barely slows heat transfer.
• Zero air sealing at can lights and top plates. The same can-light grid punches through the ceiling in house after house across Manor’s DR Horton-era subdivisions. Without sealing those penetrations, hot attic air pours into your living space all summer, and cold air infiltrates during freeze events like the 2021 Winter Storm Uri.
• Thin or missing insulation at eave edges and attic hatches. We see this in nearly identical locations across Presidential Meadows - a 6-inch gap at the eave where the original batt was cut short, or a hatch with no gasket and a half-inch gap around the perimeter. These thermal bypasses make the rest of your attic insulation far less effective.
• Attic temperatures exceeding 150°F with no radiant barrier or adequate ventilation. Manor sits on the open Blackland Prairie with minimal tree cover. Without proper ventilation prep and sufficient insulation depth, your ductwork cooks in the attic and your AC runs overtime trying to push cool air through 140-degree supply lines.

Pricing for Attic Insulation in Manor, TX

We Also Serve Cities Near Manor

We provide Attic Insulation in Manor and surrounding communities including Austin, Bastrop, Buda, and Kyle. Crews are routed daily from our Austin office, so Manor homeowners get the same scheduling priority as our closer-in customers.

FAQs - Attic Insulation in Manor